Roberto Martínez Sánchez

Educación

Áreas de Interés

Últimas publicaciones

• Enhancement of the Electrical Conductivity and Mechanical Properties of Al-Mg-Si and Al-Mg-Zn Ternary Systems After a T8 Heat Treatment

  Xóchitl Atanacio-Sánchez, Carlos Gamaliel Garay-Reyes, Alfredo Martínez-García, Ivanovich Estrada-Guel, José Manuel Mendoza-Duarte, Pedro Guerrero-Seanez, Sergio González-Sánchez, Enrique Rocha-Rangel, José de Jesús Cruz-Rivera, Emmanuel José Gutiérrez-Castaneda, Roberto Martínez-Sánchez
  METALS, Vol.14. No.1286. pp (2024)

• Effect of Co content on electrochemical hydrogen kinetics properties of single-phase BCC-type MgAlTiCoxNi high entropy alloys used as a negative electrode in basic and acidic electrolyte

  A. Martinez-Garcia, Víctor M. Orozco-Carmona, J.M. Mendoza-Duarte, E.A. Juárez-Arellano, S. González, M.A. Ruíz-Esparza-Rodríguez, I. Estrada-Guel, C. G. Garay-Reyes, R. Martínez Sánchez
  ELECTROCHIMICA ACTA, Vol.497. No.. pp144601 (2024)

• The Use of Nonmetallic Fraction Particles with the Double Purpose of Increasing the Mechanical Properties of Low-Density Polyethylene Composite and Reducing the Pollution Associated with the Recycling of Metals from E-Waste

  Rubén F Rubén Flores-Campos, Rogelio Deaquino-Lara, Mario Rodríguez-Reyes, Roberto Martínez-Sánchez, Rosa Hilda Estrada-Ruiz
  Recycling, Vol.9. No.56. pp (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.63. No.3. pp981-989 (2024)

• Development of Q&P steels of third generation under conditions simulating a continuous annealing process, and evaluation of their weldability by the RSW process

  C.A. Díaz, E.E. Martínez, D.F. De Lange, R. Saldaña, L. Guerra-Fuentes, M.F. Torres-Medina, R.E. Barreras, S.L. Rodríguez, J.J. Cruz, M.G. Peñaa-Juarez, R. Martínez-Sánchez, E.J. Gutiérrez-Castañeda
  MATERIALS LETTERS, Vol.365. No.. pp136407 (2024)

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Aluminum carbide formation in Al-graphite composites: In situ study and effects of processing variables and sintering method

  J.M. Mendoza-Duarte, I. Estrada-Guel, J.E. García-Herrera, R. Pérez-Bustamante, H. Arcos-Gutiérrez, A. Martinez-García, X. Atanacio Sánchez, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.38. No.108396. pp1-11 (2024)

• Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

  H. M. Medrano-Prieto, A. Santos-Beltrán, V. Gallegos-Orozco, M. M. Santos-Beltrán, H. Camacho-Montes, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodriguez, I. Estrada-Guel, G. Rodríguez-Cabriales, J. C. Guía-Tello, J. M. Mendoza-Duarte, J. M. Silva-Aceves, J. S. Castro-Carmona, R. Martínez-Sánchez
  Metallography, Microstructure, and Analysis, Vol.13. No.. pp181-187 (2024)

• Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

  A. Martínez-García, I. Estrada-Guel, E. Reguera, R. Amaro-Hernández, S. González, C.G. Garay-Reyes, R. Martínez-Sánchez
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.50. No.. pp670-684 (2024)

• Investigation of the strain rate sensitivity of CoCrFeMnNiTix (x=0, 0.3) high entropy alloys using the shear punch test

  S. González, A. K. Sfikas, S. Kamnis, S.E. John, N.C. Barnard, C. Gammer, J. Eckert, C.G. Garay-Reyes, R. Martínez-Sánchez
  MATERIALS & DESIGN, Vol.233. No.. pp112294 (2023)

• Influence of process conditions on the mechanical and microstructural features of milled Al sintered with rapid heating

  J.M. Mendoza-Duarte, I. Estrada-Guel, C.G. Garay-Reyes, R. Pérez-Bustamante, M. Romero-Romero, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.36. No.106539. pp1-7 (2023)

• Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components

  R.E. Villarreal-Loya, C.G. Garay-Reyes, J.M. Mendoza-Duarte, J.L. Hernández-Rivera, J.J. Cruz-Rivera, I. Estrada-Guel, R. Martínez-Sánchez.
  MATERIALS LETTERS, Vol.343. No.. pp134342 (2023)

• Microstructural and Mechanical Characterization of Al Nanocomposites Using GCNs as a Reinforcement Fabricated by Induction Sintering

  Verónica Gallegos Orozco, Audel Santos Beltrán, Miriam Santos Beltrán, Hansel Medrano Prieto, Carmen Gallegos Orozco, Ivanovich Estrada Guel, Roberto Martínez Sánchez, José Manuel Mendoza Duarte
  INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, Vol.24. No.6. pp5558 (1-17) (2023)

• Computational and experimental investigation of the strain rate sensitivity of small punch testing of the high-entropy alloy CoCrFeMnNi

  S. González, A.K. Sfikas, Spyros Kamnis, S.E. John, Z.W. Nye, M. Spink, C. Allen, R. Martínez-Sánchez, S.W. Naung, M. Rahmati, T. Keil, K. Durst, R. J. Lancaster
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.936. No.168219. pp (2023)

• Abrasive Wear Behavior of Al-4Cu-1.5Mg-WC Composites Synthesized Through Powder Metallurgy

  G. Rodríguez-Cabriales, C.G. Garay-Reyes, J.C. Guía-Tello, H.M. Medrano Prieto, I. Estrada-Guel, L.J. García-Hernández, M.A Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, K.A. García-Aguirre, S. González, R. Martínez-Sánchez
  Lubricants, Vol.11. No.3. pp12 (2023)

• Wear resistant CoCrFeMnNi0.8V high entropy alloy with multi length-scale hierarchical microstructure

  S. Gonzalez, A.K. Sfikas, S. Kamnis, C.G. Garay-Reyes, A. Hurtado-Macias, R. Martínez-Sanchez.
  MATERIALS LETTERS, Vol.331. No.133504. pp4 (2023)

• Study of Al Addition on Sintered CuCrFeNiTi as a Potential Alloy for Automotive Components

  Enrique Rocha-Rangel, Ivanovich Estrada-Guel, José A. Castillo-Robles, José A. Rodríguez-García, Carlos G. Garay-Reyes, Alejandro Villalobos-Aragón, Cynthia D. Gómez-Esparza, Carlos Adrián Calles-Arriaga, Roberto Martínez-Sánchez
  METALS, Vol.13. No.77. pp9 (2023)

• Texture, microstructure and mechanical properties of AA7075-graphite composites produced through mechanical alloying and hot-extrusion.

  E. Gutiérrez, E. Salazar, A. Salinas, R. Deaquino, A. Ponce, M. Yacaman, D. Alducin, E. Ortega, A. Bedolla, B. Fernández, R. Martínez, C. Garay
  MATERIALS CHEMISTRY AND PHYSICS, Vol.296. No.. pp14 (2023)

• Tensile flow behavior of AA7075–Ag/C composites evaluated by the Hollomon and Voce equations

  Estrada-Ruiz Rosa Hilda, Flores-Campos Rubén, Herrera-Ramírez José Martín, Muñoz-Andrade Juan Daniel, Martínez-Sánchez Roberto
  ADVANCED POWDER TECHNOLOGY, Vol.33. No.12. pp103873 (2022)

• Effect of Process Parameters on the Graphite Expansion Produced by a Green Modification of the Hummers Method

  Gabriela Tarango-Rivero, José M. Mendoza-Duarte, Audel Santos-Beltrán, Ivanovich Estrada-Guel, Carlos G. Garay-Reyes, Pedro Pizá-Ruiz, Cynthia D. Gómez-Esparza, Enrique Rocha-Rangel, Roberto Martínez-Sánchez
  MOLECULES, Vol.27. No.21. pp22 (2022)

• Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys

  M.A. Ruiz-Esparza-Rodríguez, C.G. Garay-Reyes, J.M. Mendoza-Duarte, I.Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, S. González, A.M. Garay-Tapia, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.910. No.. pp164780 (2022)

• Al-Si-Cu alloy enhanced to high-temperature application by nickel addition

  J. Camarillo-Cisneros, R. Pérez-Bustamante, R. Martínez-Sánchez,
  REVISTA MEXICANA DE FISICA, Vol.68. No.3. pp (2022)

• Unravelling the combined effect of cooling rate and microalloying on the microstructure and tribological performance of Cu50Zr50

  A. Younes, H. Izadi-Gonabadi, R. Martínez Sánchez, S.J. Bull, S. González
  WEAR, Vol.494-495. No.NA. pp204276 (2022)

• Dispersion of graphite, Ceria, and nanohybrid Ceria-graphite in the 6063 aluminum alloy through powder metallurgy

  M.L. Camacho-Rios, C.G. Garay-Reyes, D. Lardizabal-Gutierrez, I. Estrada-Guel, R. Perez-Bustamante, G. Herrera-Perez, A. Santos-Beltran, G. Rodríguez-Cabriales, C. D. Gomez-Esparza, R. Martínez-Sanchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.281. No.. pp125953 (2022)

• Phase composition and its effect on the mechanical performance of an Al‐ CoCrFeNiTi high-entropy alloy

  I. Estrada-Guel, C.A. Rodríguez-González, J. Hernández-Paz, O. Jimenez, A. Santos-Beltran, R. Martínez-Sánchez, M. Romero-Romero, C.D. Gómez- Esparza
  MATERIALS LETTERS, Vol.316. No.132035. pp1-4 (2022)

• Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy

  J. C. Guía-Tello, C. G. Garay-Reyes, G. Rodríguez-Cabriales, H. M. Medrano-Prieto, M. A. Ruiz-Esparza-Rodríguez, L. J. García Hernández, J. M. Mendoza-Duarte, K. A. García-Aguirre, I. Estrada-Guel, S. González, R. Martínez-Sánchez
  JOURNAL OF MATERIALS SCIENCE, Vol.57. No.. pp2180–2193 (2022)

• Evolution of microstructure and texture in low-carbon grain non-oriented electrical steels processed from solid-state columnar microstructures

  María Hernández‑Miranda, Emmanuel Gutiérrez‑Castañeda, Salvador Palomares‑Sánchez, Pedro Cruz‑Alcántar, Antonio Aragón‑Piña, Armando Salinas‑Rodríguez, Francisco García‑Pastor, Arnoldo Bedolla‑Jacuinde, Carlos Garay‑Reyes, Roberto Martínez‑Sánchez, Iván Reyes‑Domínguez, Javier Aguilar‑Carrillo
  Metallography, Microstructure, and Analysis, Vol.10. No.. pp876–889 (2021)

• Influence of Process Control Agent and Al Concentration on Synthesis and Phase Stability of a Mechanically Alloyed AlxCoCrFeMnNi High-Entropy Alloy

  M.A. Ruiz-Esparza-Rodriguez, C.G. Garay-Reyes, I. Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, C.D. Gómez-Esparza, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.882. No.160770. pp1-11 (2021)

• Using Intercritical CCT Diagrams and Multiple Linear Regression for the Development of Low-Alloyed Advanced High-Strength Steels

  Bryan Y. Navarrete Pino, Antonio A. Torres Castillo, Emmanuel J. Gutiérrez Castañeda, Luis A. Espinosa Zúñiga, Lorena Hernández Hernández, Armando Salinas Rodríguez, Rogelio Deaquino Lara , Rocío Saldaña Garcés , Iván A. Reyes Domínguez, Javier Aguilar Carrillo, Arnoldo Bedolla Jacuinde, Carlos G. Garay Reyes, Roberto Martínez Sánchez
  Metals, Vol.11. No.. pp1768 (2021)

• Effect of plastic deformation on the precipitation reaction in 2024 alloys

  J.C. Guía-Tello, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, L.J. García-Hernández, J. Aguilar Santillán, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.271. No.124927. pp1-5 (2021)

• Statistical and Microstructural Analyses of Al–C–Cu Composites Synthesized Using the State Solid Route

  Audel Santos Beltrán, Verónica Gallegos Orozco, Miriam Santos Beltrán, Cynthia Gómez Esparza, Iza Ronquillo Ornelas, Carmen Gallegos Orozco, Ledezma Beng, Roberto Martínez Sánchez
  MATERIALS, Vol.14. No.8. pp1969 (2021)

• Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route

  J. M. Mendoza-Duarte, F. C. Robles-Hernandez, E. Rocha-Rangel, Y. Todaka, N. Adachi, I. Estrada-Guel, C. G. Garay-Reyes, M. A. Ruiz Esparza-Rodríguez, R. Martínez-Sánchez
  JOURNAL OF MATERIALS RESEARCH, Vol.36. No.. pp1328-1340 (2021)

• Investigation of graphite/CNTs on the equiatomic AlCoNi alloy: Hardness and surface morphology of the oxide scale

  I. Estrada-Guel, M.A. Esquivel-López, C.A. Rodríguez-González, J. Hernández-Paz, O. Jimenez, R. Martinez-Sanchez, A. Duarte-Moller, C.D. Gómez-Esparza
  MATERIALS LETTERS, Vol.285. No.129042. pp1-5 (2021)

• Mechanical alloying: An alternative method to produce nimow hds catalysts

  R. Huirache-Acuña, G. Alonso-Núñez, A. Vázquez-Guerrero, R. Martínez-Sánchez.
  JOURNAL OF THE MEXICAN CHEMICAL SOCIETY, Vol.65. No.1. pp52-60 (2021)

• Thermomechanical behavior of Al-Cu-Si commercial alloy modified with rare earths

  J. Camarillo-Cisnerosa;¤, R. P´erez-Bustamanteb and R. Mart´ınez-S´anchezc;¤
  SIN REVISTA, Vol.66. No.6. pp782-789 (2020)

• Exfoliated graphite preparation based on an eco-friendly mechanochemical route

  J.M. Mendoza-Duarte, F.C. Robles-Hernández, C.D. Gomez-Esparza, J.G. Miranda-Hernández,C.G. Garay-Reyes, I. Estrada-Guel, R. Martínez-Sánchez
  JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.8. No.5. pp104370 (2020)

• The influence of chelating agents on cerium oxide decorated on graphite synthesized by the hydrothermal route

  M.L. Camacho-Ríos. J.D. Cristóbal-García, D. Lardizabal-Gutiérrez, I. Estrada-Guel, G. Herrera-Pérez, M.Piñón-Espitia, R. Martínez-Sánchez
  CERAMICS INTERNATIONAL, Vol.46. No.11. pp18791-18799 (2020)

• Effect of Ni additions and hot deformation on precipitation behavior and hardness in Al-Si-Mg aged alloys

  H.M. Medrano-Prieto, C.G. Garay-Reyes, I. Estrada-Guel, J.M. Mendoza-Duarte,J.C. Guía-Tello, R.A. Ochoa-Gamboa, C.E. Ornelas-Gutierrez, G. Rodríguez-Cabriales,J.S. Castro-Carmona, H. Camacho-Montes, M.C. Maldonado-Orozco,R. Martínez-Sanchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.828. No.. pp154429 (2020)

• Aluminum-Lithium alloy prepared by a solid-state route applying an alternative fast sintering route based on induction heating

  J.M. Mendoza-Duarte, M. Sagarnaga-Fernandez, E.G. Moreno-Resendiz, H.M. Medrano-Prieto, I. Estrada-Guel, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS LETTERS, Vol.263. No.. pp127178 (2020)

• Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

  G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera, J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
  SIN REVISTA,

• Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

  G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto,E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera,J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.22. No.. pp100758 (2020)

• Influence of ZnO nanoparticles on the microstructure of a CoCrFeMoNi matrix via powder metallurgy

  C.D. Gómez-Esparza1), A. Duarte-Moller2), C. López-Díaz de León3), R. Martínez-Sánchez1), J.F. Hernández-Paz3), and C.A. Rodríguez-González3
  SIN REVISTA, Vol.26. No.11. pp1467 (2019)

• Influence of plastic deformation and Cu/Mg weight ratio on strengthening mechanisms and precipitation behavior of AA2024 aluminum alloys.

  J. L. García-Hernández, C.G. Garay-Reyes, I. K. Gómez-Barraza, M. A. Ruiz- Esparza-Rodríguez, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, M. C. Maldonado-Orozco, R. Martínez-Sánchez.
  Journal of Materials Research and Technology, Vol.8. No.6. pp5471 (2019)

• Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution

  Z.Hernandez-Castro, D.Lardizabal-Gutierrez, A.Torres-Garcia, C.A.Rodriguez-Gonzalez, I.Estrada-Guel, R. Martínez-Sánchez, C.D.Gomez-Esparza
  MATERIALS LETTERS,

• Microstructural changes and mechanical response of aluminum-based composites prepared with dispersed CeO2 nanoparticles

  Francisco Baldenebro-Lopez, Raul Perez-Bustamante, Ivanovich Estrada-Guel, Roberto Martinez-Sanchez, Alberto Duarte-Möller and Cynthia Deisy Gómez Esparza
  ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, Vol.2019. No.. pp8 (2019)

• Effect of Fe Impurities and Pure Cr Additions on Microstructure of Nanostructured WC-10Co Alloy Sintered by HIP

  C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, I. Estrada Guel, S. E. Hernández-Martínez, J.L. Hernández-Rivera, J.J. Cruz-Rivera, J. S. Castro-Carmona, H. M. Medrano-Prieto, J.M. Silva-Aceves, H. Camacho-Montes, Quirino Estrada, R. Martínez-Sánchez.
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.800. No.. pp462 (2019)

• Microstructural evaluation and nano-hardness of an AlCoCuCrFeNiTi high entropy alloy

  C. D. Gómez-Esparza, R. Peréz-Bustamante, J. M. Alvarado-Orozco, J. Muñoz-Saldaña, R. Martínez-Sánchez, J.M. Olivares-Ramírez, A. Duarte-Moller
  SIN REVISTA, Vol.26. No.5. pp634 (2019)

Libros

• Chapter 18 A Green Method for Graphite Exfoliation Using a Mechanochemical Route

  I. Estrada-Guel, F.C. Robles-Hernandez, R. Martínez-Sánchez
  Springer, 2015 Suiza, ISBN:978-3-319-15203-5

• 1. Descomposición y engrosamiento de la fase Gamma´en el sistema Ni-Ti. Transformaciones de fase en super aleaciones base Ni.

  Carlos Gamaliel Garay Reyes, José de Jesus Crus Rivera, Roberto Martínez Schz
  Verlag / Editorial : PUBLICIA, 2014 México, ISBN:978-3-639-55528-8

• Módulo de Compósitos-Manual del Maestro

  Roberto Martínez Sanchez (Traductor) Adriana Ramos Palomino (Editor Literario) Luis Edmundo Fuentes Cobas (Director del Libro)
  Centro de Investigaciones en Materiales Avanzados (607-8272), 2014 México, ISBN:978-607-8272-01-3

• Módulo de Compósitos-Manual del Alumno

  Roberto Martínez Sanchez (Traductor) Adriana Ramos Palomino (Editor Literario) Luis Edmundo Fuentes Cobas (Director del Libro)
  Centro de Investigaciones en Materiales Avanzados (607-8272), 2014 México, ISBN:978-607-8272-02-0

Reconocimientos y Distinciones

• Premio Estatal en Ciencias

  Gobierno del EStado-CONACY-Chih

• 3er. Lugar Premio estatal de Cuiencia y Tecnologia

  CONSEJO ESTATAL DE CIENCIA, TECNOLOG�A E INNOVACIÓN COECyTeCH