Ivanovich Estrada Guel

Educación

Áreas de Interés

Últimas publicaciones

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.. No.2023. pp1-9 (2024)

• Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

  A. Martínez-García, I. Estrada-Guel, E. Reguera, R. Amaro-Hernández, S. González, C.G. Garay-Reyes, R. Martínez-Sánchez
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.50. No.. pp670-684 (2024)

• Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718

  H. M. Medrano-Prieto, A. Santos-Beltrán, V. Gallegos-Orozco, M. M. Santos-Beltrán, H. Camacho-Montes, C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodriguez, I. Estrada-Guel, G. Rodríguez-Cabriales, J. C. Guía-Tello, J. M. Mendoza-Duarte, J. M. Silva-Aceves, J. S. Castro-Carmona, R. Martínez-Sánchez
  Metallography, Microstructure, and Analysis, Vol.13. No.. pp181-187 (2024)

• Influence of process conditions on the mechanical and microstructural features of milled Al sintered with rapid heating

  J.M. Mendoza-Duarte, I. Estrada-Guel, C.G. Garay-Reyes, R. Pérez-Bustamante, M. Romero-Romero, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.36. No.106539. pp1-7 (2023)

• Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components

  R.E. Villarreal-Loya, C.G. Garay-Reyes, J.M. Mendoza-Duarte, J.L. Hernández-Rivera, J.J. Cruz-Rivera, I. Estrada-Guel, R. Martínez-Sánchez.
  MATERIALS LETTERS, Vol.343. No.. pp134342 (2023)

• Microstructural and Mechanical Characterization of Al Nanocomposites Using GCNs as a Reinforcement Fabricated by Induction Sintering

  Verónica Gallegos Orozco, Audel Santos Beltrán, Miriam Santos Beltrán, Hansel Medrano Prieto, Carmen Gallegos Orozco, Ivanovich Estrada Guel, Roberto Martínez Sánchez, José Manuel Mendoza Duarte
  INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, Vol.24. No.6. pp5558 (1-17) (2023)

• Abrasive Wear Behavior of Al-4Cu-1.5Mg-WC Composites Synthesized Through Powder Metallurgy

  G. Rodríguez-Cabriales, C.G. Garay-Reyes, J.C. Guía-Tello, H.M. Medrano Prieto, I. Estrada-Guel, L.J. García-Hernández, M.A Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, K.A. García-Aguirre, S. González, R. Martínez-Sánchez
  Lubricants, Vol.11. No.3. pp12 (2023)

• Study of Al Addition on Sintered CuCrFeNiTi as a Potential Alloy for Automotive Components

  Enrique Rocha-Rangel, Ivanovich Estrada-Guel, José A. Castillo-Robles, José A. Rodríguez-García, Carlos G. Garay-Reyes, Alejandro Villalobos-Aragón, Cynthia D. Gómez-Esparza, Carlos Adrián Calles-Arriaga, Roberto Martínez-Sánchez
  METALS, Vol.13. No.77. pp9 (2023)

• Effect of Process Parameters on the Graphite Expansion Produced by a Green Modification of the Hummers Method

  Gabriela Tarango-Rivero, José M. Mendoza-Duarte, Audel Santos-Beltrán, Ivanovich Estrada-Guel, Carlos G. Garay-Reyes, Pedro Pizá-Ruiz, Cynthia D. Gómez-Esparza, Enrique Rocha-Rangel, Roberto Martínez-Sánchez
  MOLECULES, Vol.27. No.21. pp22 (2022)

• Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys

  M.A. Ruiz-Esparza-Rodríguez, C.G. Garay-Reyes, J.M. Mendoza-Duarte, I.Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, S. González, A.M. Garay-Tapia, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.910. No.. pp164780 (2022)

• Dispersion of graphite, Ceria, and nanohybrid Ceria-graphite in the 6063 aluminum alloy through powder metallurgy

  M.L. Camacho-Rios, C.G. Garay-Reyes, D. Lardizabal-Gutierrez, I. Estrada-Guel, R. Perez-Bustamante, G. Herrera-Perez, A. Santos-Beltran, G. Rodríguez-Cabriales, C. D. Gomez-Esparza, R. Martínez-Sanchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.281. No.. pp125953 (2022)

• Turbostratic carbon/graphene prepared via the dry ice in flames method and its purification using different routes: a comparative study

  Eduardo Cuadros-Lugo, Manuel Piñon-Espitia, Harby A. Martinez-Rodríguez, Daniel Lardizabal-Gutierrez, Ivanovich Estrada-Guel, Jose M. Herrera-Ramirez, Caleb Carreño-Gallardo
  MATERIALS, Vol.15. No.7. pp2501 (2022)

• Phase composition and its effect on the mechanical performance of an Al‐ CoCrFeNiTi high-entropy alloy

  I. Estrada-Guel, C.A. Rodríguez-González, J. Hernández-Paz, O. Jimenez, A. Santos-Beltran, R. Martínez-Sánchez, M. Romero-Romero, C.D. Gómez- Esparza
  MATERIALS LETTERS, Vol.316. No.132035. pp1-4 (2022)

• Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy

  J. C. Guía-Tello, C. G. Garay-Reyes, G. Rodríguez-Cabriales, H. M. Medrano-Prieto, M. A. Ruiz-Esparza-Rodríguez, L. J. García Hernández, J. M. Mendoza-Duarte, K. A. García-Aguirre, I. Estrada-Guel, S. González, R. Martínez-Sánchez
  JOURNAL OF MATERIALS SCIENCE, Vol.57. No.. pp2180–2193 (2022)

• Influence of Process Control Agent and Al Concentration on Synthesis and Phase Stability of a Mechanically Alloyed AlxCoCrFeMnNi High-Entropy Alloy

  M.A. Ruiz-Esparza-Rodriguez, C.G. Garay-Reyes, I. Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, C.D. Gómez-Esparza, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.882. No.160770. pp1-11 (2021)

• Effect of plastic deformation on the precipitation reaction in 2024 alloys

  J.C. Guía-Tello, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, L.J. García-Hernández, J. Aguilar Santillán, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.271. No.124927. pp1-5 (2021)

• Effect on Microstructure and Hardness of Reinforcement in Al–Cu with Al4C3 Nanocomposites

  Veronica Gallegos Orozco, Audel Santos Beltrán, Miriam Santos Beltrán, Hansel Medrano Prieto, Carmen Gallegos Orozco, Ivanovich Estrada Guel
  METALS, Vol.11. No.1203. pp1-13 (2021)

• Methanol Detection in Commercial Sanitizing Gels, During the COVID-19 Pandemic

  Luis de la Torre Sáenz, Daniel Lardizábal-Gutiérrez, Ivanovich Estrada-Guel, Francisco Paraguay-Delgado
  Tecnociencia Chihuahua, Vol.XV. No.1. pp16-25 (2021)

• Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route

  J. M. Mendoza-Duarte, F. C. Robles-Hernandez, E. Rocha-Rangel, Y. Todaka, N. Adachi, I. Estrada-Guel, C. G. Garay-Reyes, M. A. Ruiz Esparza-Rodríguez, R. Martínez-Sánchez
  JOURNAL OF MATERIALS RESEARCH, Vol.36. No.. pp1328-1340 (2021)

• Investigation of graphite/CNTs on the equiatomic AlCoNi alloy: Hardness and surface morphology of the oxide scale

  I. Estrada-Guel, M.A. Esquivel-López, C.A. Rodríguez-González, J. Hernández-Paz, O. Jimenez, R. Martinez-Sanchez, A. Duarte-Moller, C.D. Gómez-Esparza
  MATERIALS LETTERS, Vol.285. No.129042. pp1-5 (2021)

• Exfoliated graphite preparation based on an eco-friendly mechanochemical route

  J.M. Mendoza-Duarte, F.C. Robles-Hernández, C.D. Gomez-Esparza, J.G. Miranda-Hernández,C.G. Garay-Reyes, I. Estrada-Guel, R. Martínez-Sánchez
  JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.8. No.5. pp104370 (2020)

• The influence of chelating agents on cerium oxide decorated on graphite synthesized by the hydrothermal route

  M.L. Camacho-Ríos. J.D. Cristóbal-García, D. Lardizabal-Gutiérrez, I. Estrada-Guel, G. Herrera-Pérez, M.Piñón-Espitia, R. Martínez-Sánchez
  CERAMICS INTERNATIONAL, Vol.46. No.11. pp18791-18799 (2020)

• Using or not using anti-inflammatory drugs against Covid-19: Timeline

  Daniel Lardizábal-Gutierrez, Ivanovich Estrada-Guel and Francisco Paraguay-Delgad
  International Journal of Pharmaceutics & Pharmacology, Vol.4. No.2. pp1-4 (2020)

• Effect of Ni additions and hot deformation on precipitation behavior and hardness in Al-Si-Mg aged alloys

  H.M. Medrano-Prieto, C.G. Garay-Reyes, I. Estrada-Guel, J.M. Mendoza-Duarte,J.C. Guía-Tello, R.A. Ochoa-Gamboa, C.E. Ornelas-Gutierrez, G. Rodríguez-Cabriales,J.S. Castro-Carmona, H. Camacho-Montes, M.C. Maldonado-Orozco,R. Martínez-Sanchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.828. No.. pp154429 (2020)

• Pelagic Sargassum spp. capture CO2 and produce calcite

  Francisco Paraguay-Delgado, Caleb Carreño-Gallardo, Ivanovich Estrada-Guel, Alberto Zabala- Arceo, Harby Alexander Martinez Rodriguez, Daniel Lardizábal-Gutierrez
  ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, Vol.2020. No.27. pp25794 (2020)

• Synthesis and characterization of low-cost glass-ceramic foams for insulating applications using glass and pumice wastes

  D. Lardizábal-G. I. Estrada-Guel J. A. Montes K. A. Ramirez-BalderramaC. Soto-Figueroa R. Ruiz Santos*
  Journal of Applied Research and Technology, Vol.18. No.1. pp44-50 (2020)

• Aluminum-Lithium alloy prepared by a solid-state route applying an alternative fast sintering route based on induction heating

  J.M. Mendoza-Duarte, M. Sagarnaga-Fernandez, E.G. Moreno-Resendiz, H.M. Medrano-Prieto, I. Estrada-Guel, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS LETTERS, Vol.263. No.. pp127178 (2020)

• Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

  G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera, J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
  SIN REVISTA,

• Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

  G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto,E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera,J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.22. No.. pp100758 (2020)

• AFM analyses of 3XXX Series Al alloy reinforced with different hard nanoparticles produced in liquid state

  Verónica Gallegos-Orozco
  MATERIALS, Vol.2020. No.13. pp272 (2020)

• AFM Analyses of 3XXX Series Al Alloy Reinforced with Dierent Hard Nanoparticles Produced in Liquid State

  Verónica Gallegos-Orozco, Audel Santos-Beltrán, Miriam Santos-Beltrán, Ivanovich Estrada-Guel, Iza Ronquillo-Ornelas, José Brito-Chaparro and Ricardo Carbajal-Sanchez
  MATERIALS, Vol.13. No.272. pp1-14 (2020)

• Influence of plastic deformation and Cu/Mg weight ratio on strengthening mechanisms and precipitation behavior of AA2024 aluminum alloys.

  J. L. García-Hernández, C.G. Garay-Reyes, I. K. Gómez-Barraza, M. A. Ruiz- Esparza-Rodríguez, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, M. C. Maldonado-Orozco, R. Martínez-Sánchez.
  Journal of Materials Research and Technology, Vol.8. No.6. pp5471 (2019)

• Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution

  Z.Hernandez-Castro, D.Lardizabal-Gutierrez, A.Torres-Garcia, C.A.Rodriguez-Gonzalez, I.Estrada-Guel, R. Martínez-Sánchez, C.D.Gomez-Esparza
  MATERIALS LETTERS,

• Enhanced elastic behavior of all-carbon composites reinforced by insitu synthesized morphed graphene

  H.A. Calderon, F. Alvarez Ramirez,D. Barber, V.G. Hadjiev, A. Okonkwo, R. Ordonez Olivares, I. Estrada Guel, F.C. Robles Hernandez
  CARBON, Vol.153. No.. pp657-662 (2019)

• Microstructural changes and mechanical response of aluminum-based composites prepared with dispersed CeO2 nanoparticles

  Francisco Baldenebro-Lopez, Raul Perez-Bustamante, Ivanovich Estrada-Guel, Roberto Martinez-Sanchez, Alberto Duarte-Möller and Cynthia Deisy Gómez Esparza
  ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, Vol.2019. No.. pp8 (2019)

• Effect of Fe Impurities and Pure Cr Additions on Microstructure of Nanostructured WC-10Co Alloy Sintered by HIP

  C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, I. Estrada Guel, S. E. Hernández-Martínez, J.L. Hernández-Rivera, J.J. Cruz-Rivera, J. S. Castro-Carmona, H. M. Medrano-Prieto, J.M. Silva-Aceves, H. Camacho-Montes, Quirino Estrada, R. Martínez-Sánchez.
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.800. No.. pp462 (2019)

Libros

• Chapter 18 A Green Method for Graphite Exfoliation Using a Mechanochemical Route

  I. Estrada-Guel, F.C. Robles-Hernandez, R. Martínez-Sánchez
  Springer, 2015 Suiza, ISBN:978-3-319-15203-5

Reconocimientos y Distinciones

• Premio Chihuahua 2020 Vanguardia en Artes y Ciencias

  Secretaría de Cultura