Carlos Gamaliel Garay Reyes

Educación

Áreas de Interés

Últimas publicaciones

• Influence of the sintering method on microstructure and microhardness of AlCuNiSnZn-based high-entropy brasses and bronzes obtained by powder metallurgy

  L.D. Laguna-Zubia, C.G. Garay-Reyes, P.A. Guerrero-Seañez, M.A. Ruiz-Esparza-Rodríguez, J.M. Mendoza-Duarte, I. Estrada-Guel, S. González, A. Martinez-Garcia, R. Martínez-Sánchez
  VACUUM, Vol.222. No.. pp113006 (2024)

• Combination of hot plastic deformation and T6 heat treatment for enhancing mechanical properties of an A356 alloy

  J. D. Franco-Madrid, C. G. Garay-Reyes, I. Estrada-Guel, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, P. A. Guerrero-Seañez, K.A. García-Aguirre, R. Martínez-Sánchez
  CANADIAN METALLURGICAL QUARTERLY, Vol.. No.2023. pp1-9 (2024)

• Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

  A. Martínez-García, I. Estrada-Guel, E. Reguera, R. Amaro-Hernández, S. González, C.G. Garay-Reyes, R. Martínez-Sánchez
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol.50. No.. pp670-684 (2024)

• Investigation of the strain rate sensitivity of CoCrFeMnNiTix (x=0, 0.3) high entropy alloys using the shear punch test

  S. González, A. K. Sfikas, S. Kamnis, S.E. John, N.C. Barnard, C. Gammer, J. Eckert, C.G. Garay-Reyes, R. Martínez-Sánchez
  MATERIALS & DESIGN, Vol.233. No.. pp112294 (2023)

• Influence of process conditions on the mechanical and microstructural features of milled Al sintered with rapid heating

  J.M. Mendoza-Duarte, I. Estrada-Guel, C.G. Garay-Reyes, R. Pérez-Bustamante, M. Romero-Romero, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.36. No.106539. pp1-7 (2023)

• Ultra-low-temperature lead-free multicomponent alloy solder for application in heat-sensitive electronic components

  R.E. Villarreal-Loya, C.G. Garay-Reyes, J.M. Mendoza-Duarte, J.L. Hernández-Rivera, J.J. Cruz-Rivera, I. Estrada-Guel, R. Martínez-Sánchez.
  MATERIALS LETTERS, Vol.343. No.. pp134342 (2023)

• Abrasive Wear Behavior of Al-4Cu-1.5Mg-WC Composites Synthesized Through Powder Metallurgy

  G. Rodríguez-Cabriales, C.G. Garay-Reyes, J.C. Guía-Tello, H.M. Medrano Prieto, I. Estrada-Guel, L.J. García-Hernández, M.A Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, K.A. García-Aguirre, S. González, R. Martínez-Sánchez
  Lubricants, Vol.11. No.3. pp12 (2023)

• Wear resistant CoCrFeMnNi0.8V high entropy alloy with multi length-scale hierarchical microstructure

  S. Gonzalez, A.K. Sfikas, S. Kamnis, C.G. Garay-Reyes, A. Hurtado-Macias, R. Martínez-Sanchez.
  MATERIALS LETTERS, Vol.331. No.133504. pp4 (2023)

• Study of Al Addition on Sintered CuCrFeNiTi as a Potential Alloy for Automotive Components

  Enrique Rocha-Rangel, Ivanovich Estrada-Guel, José A. Castillo-Robles, José A. Rodríguez-García, Carlos G. Garay-Reyes, Alejandro Villalobos-Aragón, Cynthia D. Gómez-Esparza, Carlos Adrián Calles-Arriaga, Roberto Martínez-Sánchez
  METALS, Vol.13. No.77. pp9 (2023)

• Texture, microstructure and mechanical properties of AA7075-graphite composites produced through mechanical alloying and hot-extrusion.

  E. Gutiérrez, E. Salazar, A. Salinas, R. Deaquino, A. Ponce, M. Yacaman, D. Alducin, E. Ortega, A. Bedolla, B. Fernández, R. Martínez, C. Garay
  MATERIALS CHEMISTRY AND PHYSICS, Vol.296. No.. pp14 (2023)

• Effect of Process Parameters on the Graphite Expansion Produced by a Green Modification of the Hummers Method

  Gabriela Tarango-Rivero, José M. Mendoza-Duarte, Audel Santos-Beltrán, Ivanovich Estrada-Guel, Carlos G. Garay-Reyes, Pedro Pizá-Ruiz, Cynthia D. Gómez-Esparza, Enrique Rocha-Rangel, Roberto Martínez-Sánchez
  MOLECULES, Vol.27. No.21. pp22 (2022)

• High temperature microstructure and mechanical properties of as-cast medium Mn steel with V addition

  Ana Claudia Gonzalez-Castillo, Carlos Gamaliel Garay-Reyes, José Luis Hernández-Rivera
  INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, Vol.35. No.4. pp111-120 (2022)

• Evaluation of high-frequency induction heat sintering and conventional sintering in AlxCoCrFeMnNi high-entropy alloys

  M.A. Ruiz-Esparza-Rodríguez, C.G. Garay-Reyes, J.M. Mendoza-Duarte, I.Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, S. González, A.M. Garay-Tapia, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.910. No.. pp164780 (2022)

• Dispersion of graphite, Ceria, and nanohybrid Ceria-graphite in the 6063 aluminum alloy through powder metallurgy

  M.L. Camacho-Rios, C.G. Garay-Reyes, D. Lardizabal-Gutierrez, I. Estrada-Guel, R. Perez-Bustamante, G. Herrera-Perez, A. Santos-Beltran, G. Rodríguez-Cabriales, C. D. Gomez-Esparza, R. Martínez-Sanchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.281. No.. pp125953 (2022)

• Effect of plastic deformation on the precipitation sequence of 2024 aluminum alloy

  J. C. Guía-Tello, C. G. Garay-Reyes, G. Rodríguez-Cabriales, H. M. Medrano-Prieto, M. A. Ruiz-Esparza-Rodríguez, L. J. García Hernández, J. M. Mendoza-Duarte, K. A. García-Aguirre, I. Estrada-Guel, S. González, R. Martínez-Sánchez
  JOURNAL OF MATERIALS SCIENCE, Vol.57. No.. pp2180–2193 (2022)

• Evolution of microstructure and texture in low-carbon grain non-oriented electrical steels processed from solid-state columnar microstructures

  María Hernández‑Miranda, Emmanuel Gutiérrez‑Castañeda, Salvador Palomares‑Sánchez, Pedro Cruz‑Alcántar, Antonio Aragón‑Piña, Armando Salinas‑Rodríguez, Francisco García‑Pastor, Arnoldo Bedolla‑Jacuinde, Carlos Garay‑Reyes, Roberto Martínez‑Sánchez, Iván Reyes‑Domínguez, Javier Aguilar‑Carrillo
  Metallography, Microstructure, and Analysis, Vol.10. No.. pp876–889 (2021)

• Influence of Process Control Agent and Al Concentration on Synthesis and Phase Stability of a Mechanically Alloyed AlxCoCrFeMnNi High-Entropy Alloy

  M.A. Ruiz-Esparza-Rodriguez, C.G. Garay-Reyes, I. Estrada-Guel, J.L. Hernández-Rivera, J.J. Cruz-Rivera, E. Gutiérrez-Castañeda, C.D. Gómez-Esparza, R. Martínez-Sánchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.882. No.160770. pp1-11 (2021)

• Using Intercritical CCT Diagrams and Multiple Linear Regression for the Development of Low-Alloyed Advanced High-Strength Steels

  Bryan Y. Navarrete Pino, Antonio A. Torres Castillo, Emmanuel J. Gutiérrez Castañeda, Luis A. Espinosa Zúñiga, Lorena Hernández Hernández, Armando Salinas Rodríguez, Rogelio Deaquino Lara , Rocío Saldaña Garcés , Iván A. Reyes Domínguez, Javier Aguilar Carrillo, Arnoldo Bedolla Jacuinde, Carlos G. Garay Reyes, Roberto Martínez Sánchez
  Metals, Vol.11. No.. pp1768 (2021)

• Effect of plastic deformation on the precipitation reaction in 2024 alloys

  J.C. Guía-Tello, C.G. Garay-Reyes, M.A. Ruiz-Esparza-Rodríguez, L.J. García-Hernández, J. Aguilar Santillán, I. Estrada-Guel, R. Martínez-Sánchez
  MATERIALS CHEMISTRY AND PHYSICS, Vol.271. No.124927. pp1-5 (2021)

• 3D-FEMSimulation of Hot Rolling Process and Characterization of the Resultant Microstructure of a Light-Weight Mn Steel

  Ana Claudia González-Castillo, José de Jesús Cruz-Rivera, Mitsuo Osvaldo Ramos-Azpeitia, Pedro Garnica-González, Carlos Gamaliel Garay-Reyes, José Sergio Pacheco-Cedeño, José Luis Hernández-Rivera
  CRYSTALS, Vol.11. No.5. pp569 (2021)

• Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route

  J. M. Mendoza-Duarte, F. C. Robles-Hernandez, E. Rocha-Rangel, Y. Todaka, N. Adachi, I. Estrada-Guel, C. G. Garay-Reyes, M. A. Ruiz Esparza-Rodríguez, R. Martínez-Sánchez
  JOURNAL OF MATERIALS RESEARCH, Vol.36. No.. pp1328-1340 (2021)

• Exfoliated graphite preparation based on an eco-friendly mechanochemical route

  J.M. Mendoza-Duarte, F.C. Robles-Hernández, C.D. Gomez-Esparza, J.G. Miranda-Hernández,C.G. Garay-Reyes, I. Estrada-Guel, R. Martínez-Sánchez
  JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, Vol.8. No.5. pp104370 (2020)

• Effect of Ni additions and hot deformation on precipitation behavior and hardness in Al-Si-Mg aged alloys

  H.M. Medrano-Prieto, C.G. Garay-Reyes, I. Estrada-Guel, J.M. Mendoza-Duarte,J.C. Guía-Tello, R.A. Ochoa-Gamboa, C.E. Ornelas-Gutierrez, G. Rodríguez-Cabriales,J.S. Castro-Carmona, H. Camacho-Montes, M.C. Maldonado-Orozco,R. Martínez-Sanchez
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.828. No.. pp154429 (2020)

• Aluminum-Lithium alloy prepared by a solid-state route applying an alternative fast sintering route based on induction heating

  J.M. Mendoza-Duarte, M. Sagarnaga-Fernandez, E.G. Moreno-Resendiz, H.M. Medrano-Prieto, I. Estrada-Guel, C.G. Garay-Reyes, C. Carreño-Gallardo, R. Martínez-Sánchez
  MATERIALS LETTERS, Vol.263. No.. pp127178 (2020)

• Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

  G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera, J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
  SIN REVISTA,

• Synthesis and characterization of Al-Cu-Mg system reinforced with tungsten carbide through powder metallurgy

  G. Rodríguez-Cabriales, A.M. Lometo-Sánchez, J.C. Guía-Tello, H.M. Medrano-Prieto,E.J. Gutiérrez-Castañeda, I. Estrada-Guel, C.G. Garay-Reyes, J.L. Hernández-Rivera,J.J. Cruz-Rivera, M.C. Maldonado-Orozco, R. Martínez-Sánchez
  MATERIALS TODAY COMMUNICATIONS, Vol.22. No.. pp100758 (2020)

• Influence of plastic deformation and Cu/Mg weight ratio on strengthening mechanisms and precipitation behavior of AA2024 aluminum alloys.

  J. L. García-Hernández, C.G. Garay-Reyes, I. K. Gómez-Barraza, M. A. Ruiz- Esparza-Rodríguez, E.J. Gutiérrez-Castañeda, I. Estrada-Guel, M. C. Maldonado-Orozco, R. Martínez-Sánchez.
  Journal of Materials Research and Technology, Vol.8. No.6. pp5471 (2019)

• Effect of Fe Impurities and Pure Cr Additions on Microstructure of Nanostructured WC-10Co Alloy Sintered by HIP

  C. G. Garay-Reyes, M. A. Ruiz-Esparza-Rodríguez, J. M. Mendoza-Duarte, I. Estrada Guel, S. E. Hernández-Martínez, J.L. Hernández-Rivera, J.J. Cruz-Rivera, J. S. Castro-Carmona, H. M. Medrano-Prieto, J.M. Silva-Aceves, H. Camacho-Montes, Quirino Estrada, R. Martínez-Sánchez.
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.800. No.. pp462 (2019)

• Microstructural development and mechanical properties during hot rolling and annealing of an automotive steel combining TRIP/TWIP effects.

  E.D. Palma- Elvira, P. Garnica-González, J.S. Pacheco-Cedeño, J.J. Cruz Rivera, M. Ramos-Azpeitia, C.G. Garay-Reyes, J.L. Hernández-Rivera.
  JOURNAL OF ALLOYS AND COMPOUNDS, Vol.798. No.798. pp45 (2019)

• Experimental and Numerical Analyses of the Consolidation Process of AA 7075–2 wt.% ZrO2 Powders by Equal Channel Angular Pressing

  S.E. Hernández-Martínez, J.J. Cruz-Rivera, C.G. Garay-Reyes, and J.L. Hernández-Rivera.
  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol.28. No.1. pp154 (2019)